ATX Power Supply with TFX Form Factor
FSP300-60GHT P/N: 9PA300BD00 300W
PS-TFX-FSP300-60GHT

Down Load:

Dimension:

  • WxHxL: 85 x 65 x 175 mm

  • WxHxL: 3.35 x 2.56 x 6.89 inch

  • WxHxL: 3-11/32 x 2-9/16 x 6-7/8 inch

Connectors:

  • 1x 20+4-pin Main Connector

  • 1x       4-pin P4 12V (2x2)

  • 1x     15-pin SATA Power

  • 3x       4-pin Peripheral / IDE Power

  • 1x       4-pin Floppy Power

Description:

FSP300-60GHT TFX 12V, 300-WATT POWER SUPPLY UNIT, certified to perform over 80% in operating efficiency, is designed to fit most compact high-performance PC systems.  Form factor is fully conformable to Intel TFX 12V, and power specification is fully compatible to Intel and AMD power CPUs and standard PC configurations.  It features true 300-WATT power output and 80mm cooling fan, located on the upper side of the PSU to absorbs exhausted air from internal system and channel through the rear ventilation.  Designed with thermal sensing technology, the cooling fan operate in variable speed to maximize cooling efficiency.  It is an excellent choice for high-performance compact system integration that demands higher power output requirement.  FSP Quality Assurance Program, a manufacturer’s direct service guarantees quality and performance for a period of 1-Year, included.  All FSP OEM models are qualified for RoHS, Lead-Free, Green Product (G.P) global environmental friendly status.

Features:

  • Supports AMD/Intel CPU System
  • 300-Watt Intel TFX 12V for PC
  • 80mm Cooling Fan System
  • Thermal Control System Linked to Fan
  • Energy Saver | 1-Watt Standby Mode
  • Supports Serial-ATA Output

Specification:

  • Cooling Fan(s): Single, 80mm sleeve-bearing with Thermal Sensor Linked
  • Total Output Power: 300-Watt Total Continuous Output @ 50°C
  • Output Connectors: Main 24-Pin, P4 4-Pin, (3) Molex 4-Pin, (1) FDD 4-Pin, (1) Serial-ATA 15-Pin
  • Nvidia SLI Support: N/A
  • AMD/ATI Crossfire Support: N/A
  • Modular Cable: N/A
  • Safety Approval: NEMKO, TUV, CSA, UL, CE
  • MBTF: 100,000 Hours @ Typical
  • Unit Weight: 2.0 LB (S)

Input Specification:

  • Input Voltage: 115V AC to 230V AC, 47 ~ 63Hz
  • Power Factor Correction (PFC): ACTIVE PFC | FULL RANGE
  • Input Current: 6.0A @ 115 Vrms, 60 Hz
  • Input Protection: Patented Input Fuse Protection

Output Characteristics:

Output Voltage Minimum Load Normal Load Maximum Load Peak
Load		 Load Reg. Line Reg. Ripple Noise
+3.3VDC 0.1A 10A 20A -- ± 5% ± 1% 70mV P-P
+5VDC 0.2A 11A 22A -- ± 5% ± 1% 70mV P-P
+12V1DC 0.1A 7A 14A -- ± 5% ± 1% 140mV P-P
+12V2DC 0.5A 8A 16A 19A ± 5% ± 1% 140mV P-P
-12VDC 0A 0.25A 0.5A -- ± 10% ± 1% 140mV P-P
+5Vsb 0A 1A 2A 2.5A ± 5% ± 1% 70mV P-P

  • +3.3V and +5V total output not exceed 110W

  • Total output continuous shall not exceed 300W

  • +12V2 Peak current is 19A (less then 10m Sec.) minimum voltage during peak is > 10.8VDC

  • +5Vsb Peak current is 2.5A (less then 500m Sec.) minimum voltage during peak is > 4.5VDC