ATX Power Supply with TFX Form Factor
FSP270-50SAV by FSP
 PS-TFX-FSP270-50SAV

Down Load FSP270-50SAV PDF Drawing

Dimension:

  • WxHxL: 84.6 x 65 x 175.6 mm

  • WxHxL: 3.33 x 2.56 x 6.86 inch

  • WxHxL: 3-21/64 x 2-9/16 x 6-55/64 inch

Connectors:

  • 1x 24-pin Main Connector

  • 1x   4-pin (P4 2x2)

  • 1x 15-pin SATA Power

  • 2x   4-pin Peripheral / IDE Power

  • 1x   4-pin Floppy Power

FSP270-50SAV(PF) TFX 12V, 270-WATT POWER SUPPLY UNIT is designed to fit most compact high-performance PC systems.  Form factor is fully conformable to Intel TFX 12V, and power specification is fully compatible to Intel and AMD power CPUs and standard PC configurations.  It features true 270-WATT power output and 80mm cooling fan, located on the upper side of the PSU to absorbs exhausted air from internal system and channel through the rear ventilation.  Designed with thermal sensing technology, the cooling fan operate in variable speed to maximize cooling efficiency.  It is an excellent choice for high-performance compact system integration that demands higher power output requirement.  FSP Quality Assurance Program, a manufacturer’s direct service guarantees quality and performance for a period of 1-Year, included.  All FSP OEM models are qualified for RoHS, Lead-Free, Green Product (G.P) global environmental friendly status.

Features:

  • Supports AMD/Intel CPU System
  • 270-Watt Intel TFX 12V for PC
  • 80mm Cooling Fan System
  • Thermal Control System Linked to Fan
  • Energy Saver | 1-Watt Standby Mode
  • High Power Conversion Efficiency
  • Supports Serial-ATA Output

Specification:

  • Cooling Fan(s): Single, 80mm sleeve-bearing with Thermal Sensor Linked
  • Total Output Power: 270-Watt Total Continuous Output @ 30°C
  • Output Connectors: Main 24-Pin, P4 4-Pin, (2) Molex 4-Pin, (1) FDD 4-Pin,(1) Serial-ATA 15-Pin
  • Nvidia SLI Support: N/A
  • AMD/ATI Crossfire Support: N/A
  • 80Plus Certified: N/A
  • Modular Cable: N/A
  • Safety Approval: UL, FCC, CSA, VDE, NEMKO, CE, CB, CNS
  • MBTF: 100,000 Hours @ Typical
  • Unit Weight: 2.0 LB (S)

Output Characteristics:
Output Voltage Minimum Load Maximum Load Load Reg. Line Reg. Ripple Noise
+3.3V 0.5A 11.5/16.7A ± 5% ± 1% 50mV P-P
+5V 1.0A 16/12.6A ± 5% ± 1% 50mV P-P
+12V 2.0A 10A ± 5% ± 1% 120mV P-P
-5V 0.0A 0.2A ± 10% ± 2% 120mV P-P
-12V 0.0A 0.3A ± 10% ± 2% 120mV P-P
+5Vsb 0.0A 2.0 A ± 5% ± 1% 50mV P-P

  • +3.3V and +5V total output not exceed 120W
    when +3.3V is load to 17.0A, the +5V maximum load is 12.78A
    when +3.3V is load to 9.09A, the +5V maximum load is 18A

  • +12V1DC & +12V2DC total output not exceed 250W

  • +3.3V & +5V & +12V1DC & +12V2DC total output not exceed 256W

  • All outputs shall be safety-isolated from the AC mains and share a common return. This common return must be connected to supply chassis.

  • Voltage and ripple are measured at the load side of mating connectors with a 0.1μF monolithic ceramic capacitor paralleled by a 10 μF electrolytic capacitor across the measuring terminals.