The Russound P125 is a 2-channel dual source power amplifier with
auto-source switching. It features Primary and Secondary audio line
inputs with a loop out to another zone, receiver, or device from the
secondary source. A speaker-level input can be connected and
assigned as either the primary or secondary source. This amplifier
can be used for power upgrades in zones for large speaker selector
or volume control systems.
The P125 is rated at 125 watts per channel into 4 ohms, and 80 watts
into 8 ohms. With the Stereo/Bridge Mono switch in the Bridge Mono
position, both amplifier channels are combined for a higher powered
mono output. In Bridge mode the X125 is rated at 250 watts of power
into a single 8 ohm load. The 12V Trigger In/Out allows the
amplifier to be activated by other devices or to activate other
electronics via a 3.5 mm mini phone plug cable, with 100mA current
capability.
Not available to countries requiring CE certification. Modifications
are necessary for use at 220v.
