Tone Generator & Probe Kit
Harris Fluke Networks PRO-3000 (Pro3000 Toner)
P/N: 26000900 Pro300 Tone & Probe Kit
TS-TONE-PRO3000

Harris’ Pro3000 Tone and Probe Kit is THE professional kit you need for tracing and toning wire or cable. Use it on de-energized AC wire, telephone / twisted pair wire, all voice and data category rated cable, all coax cable, speaker wire, security wire, virtually any cable or wire! All in a durable nylon pouch with three pockets and extra large belt clip.

PRO3000 Probe
Ergonomic, sleek design is easy to handle and use. Large speaker on the probe makes the tone easier to hear through walls, enclosures, wood or plaster. A recessed on/off button helps prevent it accidentally being turned on in pouch. Accommodates a headset (sold separately) for use in noisy environments.

Top Features:
> Loud large speaker amplifies tone through walls, enclosure, wood or plaster
> Easy-to-use adjustable volume control dial
> “Quick-twist” tip for easy replacement
> FREE Spare Tip inside

PRO3000 Tone Generator
Easy to operate with a single button and patented SmartTone™ Technology built inside! By touching the wires together and momentarily shorting a cable pair, the SmartTone tone generator will change the sound of the tone if you are clipped on to the correct pair. This allows you to verify and positively identify that you have located the correct wire pair. SmartTone provides 5 distinct tones to insure that there is no doubt that you are using the correct wires.

Top Features:
> SmartTone technology
> Send tone signal up to 10 miles on most cables
> Line cord features Angled Bed-of-Nails clips and ruggedized RJ-11 plug for direct access to phone and data jacks without adapters
> External switch lets you select solid or alternating tone options, indicated with solid or flashing LEDs
> Continuity testing
> Line polarity confirmation

Part Number Description
26000-900 Pro300 Tone & Probe Kit

Pro3000 TONER Specifications
User Interface:
> Slide switch selects Continuity or Tone Mode
> Push button Switch selects SOLID, ALT or OFF
> Tone Mode LED / Polarity LED
Frequency:
> SOLID: 1000 Hz nominal
> ALT: 1000/1500 Hz nominal
> Over Voltage Protection: 60 Vdc in Toner/Polarity Mode
> Output Power in Tone Mode: 8 dbm into 600 ohms
> Output Voltage Level in Continuity Mode: 8 Vdc with fresh battery
Battery: 9V Alkaline
Temperature: Operating: -20C to 60C, Storage: -40C to 70C
Case Dimensions: 2.7in. x 2.4in. x 1.4in. (6.9cm x 6.1cm x 3.6cm)

Pro3000 PROBE Specifications
User Interface:
> ON/OFF Pushbutton
> Volume Dial
> Replaceable Tip
> 3.5 mm Earphone Jack
Battery: 9V Alkaline
Temperature: Operating: -20C to 60C, Storage: -40C to 70C
Case Dimensions: 9.8in. x 1.6in. x 1.3in. (24.9cm x 4.1cm x 3.3cm)

Model, Options, and Accessories:
> 26000900 - Pro3000 Analog Tone & Probe Kit
> 26100900 - Pro3000 Analog Probe
> 26200900 - Pro3000 Analog Tone Generator
> 26400000 - Pro3000 Analog Tone and Probe Kit Pouch Only
> 26100103 - Pro3000 Analog Probe replacement tip (two per bag)
> 26300000 - Earpiece, Pro3000 Probe