Benefits:

• Value-driven pricing model that prices the VWM series at least 35% less than a same-sized dual-hinge wallmount
• Inventoried item that is available from stock for quick delivery
• The product's design features ensure ease of use and applicability to modern datacom, security and networking installations

Features:

• Used to provide a cost effective, practical and secure means to mount communications cabling, networking gear and related equipment on a wall

• Features a fully welded, single piece, 18 gauge cold rolled steel frame

• Includes one pair of fully adjustable EIA square hole mounting rails and 50 M6 cage nuts and screws

• Includes a tempered glass door that is removable, reversible, lockable and features 180 degree opening

• Includes removable, locking side panels for ease of access to installed equipment and cabling

• Designed to help keep installed equipment cool with adequate ventilation areas and easy adaptation to available 4.5” fan kit (2 x 105 CFM fans)

• Cable entry gland plate on top and bottom of the cabinet allows for easy cable installation and maintenance

• Multiple cable tie lances on the rear of the cabinet for cable tie points or accessory mounting

• UL listed to the UL60950 standard - file number E235184

• 150 lb. load rating

• Available in RAL 9005 black powder coat finish

Specification Example (available choices are shown between the [ ])

Wall-mounted electronic enclosures shall be designed to hold 19” rack mounted equipment and be EIA-310-D compliant. Enclosures shall be [24”, 36”, 48”] high containing [11, 18, 25] rack mounting units by [12”, 18”, 24”] deep. Construction shall be of 18 gauge steel and shall be fully welded in a single-piece configuration. The enclosure shall have a load rating of 150 pounds when equipment is evenly distributed and the enclosure is anchored to an adequate surface. Enclosures shall have 13”L by 2.25”D cable entry gland plate to accommodate cable entry as well as raised lances for cable tie down or accessory mounting points. Enclosures shall include a pair of mounting rails that are punched with EIA square holes in the universal mounting hole pattern. Enclosures shall accept up to two fan kits to facilitate airflow through the enclosure as well as a filter kit to ensure that intake air is clean. The enclosures shall be provided with a textured, semi-gloss RAL9005 black powder coat finish. Enclosures shall be UL listed to the Information Technology and Communications Equipment Cabinet, Enclosure and Rack Systems standard in the US and Canada.

Accessories: