ATX Power Supply with TFX Form Factor
ENP-2220A by Enhance
 PS-TFX-ENP2220A

 Dimension:
> WxHxL: 82x62x150mm (3.22"x2.44"x5.91")

Connectors:
> 1x 20-pin Main Connector
> 1x 4-pin (P4 2x2)
> 3x 4-pin Peripheral / IDE Power
> 1x 4-pin Floppy Power

Features:
> TFX12V Rev 1.2 compliant
> High Efficiency
> Remote On/Off
> Power good TTL Signal
> Short Circuit, Over Current & Voltage Protection
> Auto-Sensing Thermal Control
> Low Acoustic Noise

Apply for:
> All Intel Processors up to P4
> All AMD Processors up to Athlon XP

Electrical Specifications:
> Input Voltage: 110 ~ 127 VAC, 200 ~ 240 VAC, Manual Select
> Frequency: 50 ~ 60 Hz
> Input Current: 5.0 Arms @ 115 VAC, 3.0 Arms @ 230 VAC
> Holdup Time: > 14ms @ Full Load

Environmental Specifications:
> Operating/Storage Temp.: 10~50°C/-20~60°C
> Operating/Storage Humidity: 85% / 95%
> Operating/Storage Altitude: 10,000/50,000ft
> MTBF: 100,000 HRS
> Safety Approvals: UL/CUL, CB, TUV
> EMC Regulations: FCC, CE

Output Characteristics:
Voltage Load Reg. Minimum Load Maximum Load Peak
+3.3V + 5% / -3% 0.3A 17.0A --
+5.0V ± 5% 1.0A 21.0A --
+12.0V ± 5% 0.5A 10.0A 13.0A
-12.0V ± 10% 0A 0.8A --
-5.0V ± 10% 0A 0.3A --
+5 Vsb ± 5% 0A 1.5A --

* Total maximum combines load output on +3.3V and +5V rails is 110 Watts.