E-Machine SFX12V Power Supply
SFX 12V Micro ATX Switching Power Supply
FSP300-60GLS (FSP300GLS-B204) by Fortron Source

PS-SFX-FSP300-60GLS

Down Load FSP300-60GLS PDF Drawing

Connectors:
> 1x 20+4-pin Main Connector
> 1x       4-pin P4 (2x2)
> 2x     15-pin SATA Power
> 3x       4-pin Peripheral / IDE Power
> 1x       4-pin Floppy Power

Features:
> Complied with SFX12V standard
> Active Power Factor Correction (PFC) meet EN61000-3-2
> High efficiency and reliability
> Compatible with European Union Directive 2002/95/EC (Restriction on Hazardous Substances).
> Remote ON/OFF function
> Internal 12V DC fan included
> Noise Killer (thermal fan speed control function)
> Low noise and ripple
> Output over voltage, short circuit, and over current protection
> 100% Hi- ot, ATE, and burn-in tested
> Re-settable power shut down
> Complies with FCC part 15 subpart J class B 115Vac operation, and CISPR 22 class B at 230Vac operation
> Approved y CUL/UL60950-1, CSA C22.2 EN60950- O EN60950-1, NEMKO EN60950-1 (CB b NO. 60950-1, FIMKO 1, SEMK Report) CE

Specifications:
> Temperature Range: Operating: 0°C ~ +50°C ; storage & shipping: -20°C ~ +80°C
> Humidity: 5 ~ 95% on operating, 5 ~ 95% on storage
> Dielectric Withstand: Primary frame ground 1800V AC for 1 second
> Efficiency: 70% minimum
> Rise time: Less than 20ms
> Hold-up Time: 17ms minimum at nominal input voltage
> Power Good Signal: Power on delay time 100 ~ 500ms, off delay 1ms minimum (TTL and CMOS compatible)
> Leakage Current: Less than 3.5mA .
> MTBF: 100,000 hours on maximum load at +25°C
> Dimensions (LxWxH): 100x125x63.5mm / 4x4.9x2.5inch

Input Characteristics:
> Input Range: 90 ~ 265Vac (RMS), Full Range Input
> Frequency: 47 ~ 63Hz
> Input Current: Max 4A (RMS) @ 115Vac,2A (RMS) @ 230Vac
> Inrush Current: No damage


Output Characteristics:
Output Voltage Minimum Load Normal Load Maximum Load Load Reg. Ripple Noise
+3.3V 0.5A 10A 20A ± 5% 50mV P-P
+5V 0.3A 9A 18A ± 5% 50mV P-P
+12V1DC 1.0A 4A 8A ± 5% 120mV P-P
+12V2DC 1.0A 8A 16A ± 5% 120mV P-P
-12V 0.0A 0.25A 0.5A ± 10% 120mV P-P
+5Vsb 0.0A 1.00A 2.0A ± 5% 50mV P-P

*+3.3V and +5V total output not exceed 125W
* Total output for this subject power supply is 300W