 |
|
E-Machine SFX12V Power
Supply SFX 12V Micro ATX Switching Power Supply FSP200-50SNV with P4 Connector AC Socket on the 5-inch (125-mm) Side Cooling Fan on the Back ( Air Direction: Out ) PS-SFX-ELO-200-50SNV Down Load FSP200-50SNV PDF Drawing Features: > High efficiency > Low ripple & noise > Output over voltage protection > Short circuit protection on all outputs > Resettable power shut down > 100% burn-in under high ambient temperature (50°C) > MTBF: 100K hours at 25°C Input Specifications: > Voltage: 115/230 VAC > Frequency: 47Hz - 63Hz > Input current: 4.0 amps maximum / 230 Vrms, 50Hz. Output Characteristics: > Over-voltage protection: +5V: 6.5V (maximum) +3.3V: 4.6V (maximum) +12V:15.5V (maximum) > Over-current protection: +3.3V:48A (maximum) +5V:42A (maximum) +12V:19A (maximum) > Remote ON/OFF control: The power supply shall accept a logic collector level which will disable / enable all output voltage (excluding +5V standby). > Power good signal: 230V (full load): 100 - 500 ms Output Characteristics: Output Minimum Maximum Load Ripple Voltage Load Load Reg. Noise +3.3V 0.5A 11.5/16.7A ± 5% 50mV P-P +5V 1.0A 16/12.6A ± 5% 50mV P-P +12V 2.0A 10A ± 5% 120mV P-P -12V 0.0A 0.5A ± 10% 120mV P-P +5Vsb 0.1A 2.0 A ± 5% 50mV P-P * +3.3V & +5V total output not exceed 118W * +3.3V & +5V & +12V total output not exceed 182.5W General Specifications > Efficiency: 65% min. > Hold-up time: 10 ms minimum: at 230V / 50 Hz (full load). Environmental Specifications > Operating conditions: ambient temperature 0°C~50°C > Storage and shipping conditions: ambient temperature -20°C~+65°C > Dielectric withstand: input / output 1800 VAC for 1 second input to frame ground 1800VAC for 1 second
|
