E-Machine
SFX12V Power
Supply
SFX 12V Micro ATX
Switching Power Supply
FSP180-50NI(V) (
FSP180-50NIV ) with P4 Connector
SPI (Sparkle Power) FSP Group (Fortron Source)
PS-SFX-EL-180-50NIV
Down Load FSP180-50NI(V) ( FSP180-50NIV )
PDF Drawing
Features:
> Complied with SFX and SFX12V standard
> High efficiency and reliability
> Remote On/Off function
> Internal 12V DC fan included
> Noise Killer (Thermal fan speed control function)
> Low noise and ripple
> Complies with FCC part 15 subpart J Class B and CISPR 22 Class B
> Output over voltage, short circuit, and over current protection
> 100% Hi-pot, ATE, and burn-in tested
> Re-settable power shut down
> Approved by UL 1950, CSA C22.2 Level 3, TUV EN60950, NEMKO (CB Report)
Input Characteristics:
> Input Range: 95~132/190~264V AC, Manual selection
> Frequency: 47~63Hz
> Input Current: 6A (RMS) @115V AC, 3A (RMS) @230V AC
> Inrush Current: 50A Max for 132V AC Cold start
Output Characteristics:
Output Minimum
Maximum Load Line
Ripple
Voltage Load
Load Reg. Reg.
Noise
+3.3V 0.5A
11.5/16.7A ±
5% ± 1% 50mV P-P
+5V
1.0A 16/12.6A ± 5% ± 1%
50mV P-P
+12V
2.0A 10A ± 5%
± 1% 120mV P-P
-12V
0.0A 0.3A ± 10%
± 2% 120mV P-P
+5Vsb 0.0A
2.0 A
± 5% ± 1% 50mV P-P
*When +3.3Vis load on 16.7A, the +5V maximum load is 12.6A
*When +3.3Vis load on 11.5A, the +5V maximum load is 16A
Specification:
> Temperature Range: Operating 0° C ~ +50° C on full load; storage &
shipping -20° C ~ +65° C
> Humidity: 90% on operating and 95% on storage
> Dielectric Withstand: Input to frame ground 1800V AC for 1 second
> Efficiency: 65% at minimum measured at nominal AC main voltage and
frequency with maximum load on all output
> Rise Time: Less than 20ms on all output
> Hold-up Time: 16.6ms minimum at nominal input voltage
> Power Good Signal: Power on delay time 100 ms to 500 ms, off delay 1ms
minimum (TTL and CMOS compatible)
> Leakage Current: Less than 3.5mA
> MTBF: 100,000 hours on maximum load at +25° C degree
> Dimension (WxHxL): 125x76.4x100mm/5”x3”x4” inches |
