Redundant EPS 12V 500W 2U Power Supply
Emacs / Zippy
R2W-6500P (P/N: B000840014)
PS-R2-ZP-R2W-6500P

Down Load:

Dimension: (WxDxH)

  • 101 x 84 x 300 mm
  • 3.98 x 3.31 x 11.81 inch  
  • 3-31/32 x 3-5/16 x 11-13/16 inch

Connectors:

  •   1x 24-pin Main Connector
  •   1x   8-pin EPS 12V
  •   1x   4-pin P4 12V
  •   1x   6-pin AUX
  • 13x   4-pin Peripheral / IDE Power
  •   3x   4-pin Floppy Power
  •   1x   2-pin 3.68mm Buzzer Reset
  •   1x   2-pin 2.54mm TTL Signal
  •   1x            LED

Features:

  • Active PFC (full range), meet IEC-1000-3-2 Class D
  • 12V Max. Current: 32A
  • Temperature Range:
    Operating 0C ~ 40C
    Storage: -20C ~ 70C
  • Humidity:
    Operating: 20%-95%
    Non-Operating: 10%-95%
  • Remarks: 85% is normal condition and 95% is with special coating process.
  • Dual EMI Noise Inlet Filter: FCC Class B, CISPR22 Class B
  • Safety: UL 1950, CSA 22.2 No/ 950, TUV IEC 950
  • Hot-Swappable / Hot-Pluggable Redundancy Function
  • Hold Up Time: 16ms minimum at full load & 90VAC input voltage
  • Use 48-pin industrial connectors
  • Cooling: 2x 38x38x28 mm DC Fans (Module)
  • AC Inlet in each module
  • Serial ATA optional

Specification:

  • Output Wattage: 500W
  • ATX 2.03, ATX12V(P4), EPS12V, WTX, AMD-GES
  • Best Solution for: Server, Workstation, Storage System, IPC
  • Dimension: (WxDxH)
    101 x 84 x 300 mm
    3.98 x 3.31 x 11.81 inch  
    3-31/32 x 3-5/16 x 11-13/16 inch
  • Voltage: 105~264 VAC Full Range
  • Output Characteristics:
    Output
    Voltage
    Min. Output
    Current
    Max. Output
    Current
    Peak Output
    Current
    Regulation
    Load
    Regulation
    Line
    Output Ripple &
    Noise Max. [P-P]
    +5V 2.0 30.00 --- 5% 1% 50mV
    +12V 2.0 32 --- 5% 1% 120mV
    -5V 0.05 0.7 --- +5% ~ -10% 1% 120mV
    -12V 0.05 0.7 --- +5% ~ -10% 1% 120mV
    3.3V 1 24 --- 5% 1% 50mV
    +5VSB 0.1 2 --- +6% ~ -5% 1% 50mV

    Remarks:
    > Total Current of +5V and +3.3V not exceed 43A
    > Total Output Power not exceed 500W

* The power supply is for chassis assembly only and is not allowed to be operated as stand-alone component. Final assembly has to comply with corresponding EMC and safety regulations.