Micro ATX Switching Power Supply
FSP300-60SPC PS3 (PS/3) Type
 PS-PS3-FSP300-60SPC

Down Load:

Dimension: WxHxD

  • 150 x 86 x 100 mm
  • 5.91 x 3.39 x 3.94 inch
  • 5-15/16 x 3-3/8 x 3-15/16 inch

Connectors:

  • 1x 24-pin Main Connector
  • 1x   4-pin (P4 2x2)
  • 2x   15-pin SATA Power
  • 2x   4-pin Peripheral / IDE Power
  • 1x   4-pin Floppy Power

Description:

This Micro ATX/ PS3 SIZE 300-Watt ATX V2.3 Power Supply Unit is designed to fit most compact small form factor PC systems with high-power output in mind. It features full compatibility to Intel and AMD power CPU and standard PC configurations, 300 WATT continuous power output and 80mm vertical cooling fan with thermal sensing technology.  It is an excellent choice for compact, small form factor systems integration that demands higher power output requirement.  FSP Quality Assurance Program, a manufacturer’s direct service guarantees quality and performance for a period of 1-Year, included.  All FSP OEM models are qualified for RoHS, Lead-Free, Green Product (G.P) global environmental friendly status.

Features:

  • Supports AMD/Intel CPU System
  • 300-Watt Micro ATX/ PS3 Size for PC
  • 80mm Vertical Cooling Fan System
  • Thermal Control System Linked to Fan
  • Energy Saver, 1-Watt Standby Mode
  • High Power Conversion Efficiency
  • Supports Serial-ATA Output
Output Specifications:
  • +12V Rails: 2
  • Output Voltage: +3.3V DC, +5V DC, +12V1 DC, +12V2 DC, -12V DC, +5Vsb DC (Standby)
  • Output Current:
    21A @ +3.3V DC
    15A @ +5V DC
    11A @ +12V1 DC
    8A @ +12V2 DC
    0.3A @ -12V DC
    1.25A @ +5Vsb DC Standby
  • Output Protection:
    Complete OVP, OCP, SCP Protection
    OVP: OVER VOLTAGE PROTECTION
    OCP: OVER CURRENT PROTECTION
    SCP: SHORT-CIRCUIT PROTECTIOn

Output Chart:

Output Voltage Minimum Load Normal Load Maximum Load Peak Load Load Reg. Line Reg. Ripple Ripple & Noise
+3.3V 0.1A 10.5A 21A --- ± 5% ± 1% 50mV P-P 70mV P-P
+5V 0.2A 7.5A 15A --- ± 5% ± 1% 50mV P-P 70mV P-P
+12V1 0.1A 5.5A 11A 13A ± 5% ± 1% 120mV P-P 140mV P-P
+12V2 0.5A 4A 8A 13A ± 5% ± 1% 120mV P-P 140mV P-P
-12V 0.0A 0.15A 0.3A --- ± 10% ± 1% 120mV P-P 140mV P-P
+5Vsb 0.0A 1.25A 2.5A 3.5A ± 5% ± 1% 50mV P-P 70mV P-P
( 1 ).+3.3V & +5V total output not exceed 97W.
( 2 ).Total output for this subject power supply is 300 watts, peak load 350 watts.
( 3 ).The maximum continuous power rating of supply is 300W at 25°C..
( 4 ). +12V2 Peak current is 17A(less than 10m Sec.), minimum voltage during peak is >11.0Vdc.
( 5 ). 5Vsb peak current is 2.5A(less then 500mSec.), minimum voltage during peak is > 4.5Vdc.
( 6 ).Voltages and ripple are measured at the load side of mating connectors with a 0.1 uF
        monolithic ceramic capacitor paralleled by a 10 uF electrolytic capacitor across the measuring
        terminals.

Mechanical Specifications

The mechanical drawing of the subject power supply, which indicate the form factor, location of the mounting holes, location, the length of the connectors, and other physical specifications of the subject power supply. Please refer to the attachment drawing.