Down Load:

• P2G-5650V (P/N: B00P2G065V011) Drawing
• P2G-5650V Spec

Dimension: (WxHxL)

• 100 x 70 x 240 mm
• 3.94 x 2.76 x 9.45 inch  
• 3-15/16 x 2-3/4 x 9-7/16 inch

Connectors:

• 1x 20+4-pin Main Connector
• 1x       8-pin EPS 12V
• 2x   6+2-pin PCI Express
• 1x   4+4-pin P4 12V x2
• 4x     15-pin SATA Power Connector
• 5x       4-pin Peripheral / IDE Power
• 1x       4-pin Floppy Power

Features:

• Temperature Range:
  Operating -10°C ~ 40°C
  Storage: -20°C ~ 80°C
• Hold Up Time: 16ms Minimum at Full Load & Normal Input Voltage
• Efficiency: 80~84% Typical at 115V, Full Load
• Power Good Signal: On Delay 100ms to 500ms, Off Delay 1ms
• Over Power Protection
• Over Voltage Protection
• Short Circuit Protection
• EMI: FCC Class B, CISPR22 Class B
• Safety: to meet UL, CUL, TUV, CCC
• Cooling: 1x 60mm DC Fan
• Meet IEC-1000-3-2 Class D

Specification:

• Output Wattage: 650W
• Best Solution for: Server, Workstation, Storage System, IPC

• Dimension: (WxDxH)
  100 x 70 x 240 mm
  3.94 x 2.76 x 9.45 inch  
  3-15/16 x 2-3/4 x 9-7/16 inch

• Voltage: 90~264 VAC Full Range
• Frequency: 47~63Hz
• Input Current: 10.0A (RMS) for 115VAC, 5.0A (RMS) for 230VAC
• Inrush Current: 25A Max. for 115VAC, 50A Max. for 230VAC
• Power Factor Correction: PFC can reach the target of 95% at 115/230VAC, Full Load
• Output Characteristics:

  Output Voltage	Min. Output Current	Max. Output Current	Peak Output Current	Regulation Load	Regulation Line	Output Ripple & Noise Max. [P-P]
  +5V	5	25.00	---	±5%	±1%	60mV
  +12V	0.5	50	---	±5%	±1%	120mV
  -12V	0	0.8	---	±5%	±1%	120mV
  3.3V	0.5	25	---	±5%	±1%	60mV
  +5VSB	0	3.5	---	±5%	±1%	60mV
  Remarks: >

* The power supply is for chassis assembly only and is not allowed to be operated as stand-alone component. Final assembly has to comply with corresponding EMC and safety regulations.