Down Load:

• P1H-5400V (P/N: B00P1H040V003) Drawing
• P1H-5400V Spec

Dimension: (WxHxL)

• 100 x 40.5 x 225 mm
• 3.94 x 1.59 x 8.66 inch  
• 3-15/16 x 1-19/32 x 8-21/32 inch

Connectors:

• 1x 24-pin Main Connector
• 1x   8-pin EPS 12V
• 1x   4-pin P4 12V
• 2x 15-pin SATA Power
• 4x   4-pin Peripheral / IDE Power
• 2x   4-pin Floppy Power

Features:

• Temperature Range:
  Operating -10°C ~ 40°C
  Storage -20°C ~ 80°C
• Hold Up Time: 16ms Minimum at Full Load & Normal Input voltage
• Efficiency: 80% Typical at 115V, Full Load
• Power Good Signal: On Delay 100ms to 500ms, Off Delay 1ms
• Over Power Protection
• Over Voltage Protection
• Over Current Protection
• Short Circuit Protection
• EMI Noise Filer: FCC Class B, CISPR22 Class B
• Safety: Meet UL, CUL, TUV CCC*3.3V / 5V Remote Sensing
• Cooling: 1x 40mm DC Fan
• Active Power Factor Correction meet IEC-1000-3-2 Class D

Specification:

• Voltage: 90~264 VAC Full Range
• Frequency: 47~63 Hz
• Input current: 10.0A (RMS) for 115VAC / 5.0A (RMS) for 230VAC
• Inrush Current: 40A Max. for 115VAC / 60A Max. for 230VAC
• Output Characteristics:

  Output Voltage	Min. Output Current	Max. Output Current	Peak Output Current	Regulation Load	Regulation Line	Output Ripple & Noise Max. [P-P]
  +5V	0.5	22.00	---	±5%	±1%	50mV
  +12V	2	32	---	±5%	±1%	120mV
  -12V	0	0.8	---	±5%	±1%	150mV
  3.3V	0.5	22	---	±5%	±1%	50mV
  +5VSB	0.1	3.5	---	±5%	±1%	50mV
  Remarks:

* The power supply is for chassis assembly only and is not allowed to be operated as stand-alone component. Final assembly has to comply with corresponding EMC and safety regulations.