|
 |
|
|
Thermal
ADHESIVE |
|
|
CAUTION! Arctic Silver Thermal Adhesive is a permanent adhesive. Components you attach with Arctic Silver Thermal Adhesive will stay attached forever.  Arctic Silver is a trademark of Arctic Silver, Inc. 2000, 2001. All information on this page is copyright 2001, Arctic Silver, Inc. |
Arctic
Silver Thermal Adhesive features: * Made with 99.8% pure micronized silver. * 62% to 65% silver content by weight. * Superior thermal conductivity. Greater than 7.5 W/m°K * Temperature range: - 40C to >150C (Bond strength is weakened at very low temperatures due to crystallization.) * Negligible electrical conductivity. Arctic Silver Thermal Adhesive was formulated to conduct heat, not electricity. Even though Arctic Silver Thermal Adhesive is specifically engineered for high electrical resistance, it should be keep away from electrical traces, pins, and leads. The cured adhesive is slightly capacitive and could potentially cause problems if it bridged two close-proximity electrical paths. A set of Arctic Silver Thermal Adhesive consists of two tubes containing a total of 7 grams of adhesive (3.5 grams of Part A and 3.5 grams of Part B) and a plastic reusable mixing wand. |
