D26113NA3 - VGA UTP Extender 1X2 (1 IN 2 OUTPUT) Splitter with Audio VIA CAT5.

The D26113NA3 VGA UTP Extender 1X2 Splitter with Audio is an ideal device for local displaying and remote viewing. It combines split function and extension function. It distributes the input of the VGA signal and audio signal into the local and remote outputs simultaneously. Receiver by Cat5 x1 works with the Sender as a full functional module by receiving the distributed signal from the sender and transmitting to display. Only by the most inexpensive CAT-5e/6 cable the full functional module extend the VGA display max up to 300 meters. It offers solutions for VGA retail and show site and Projector factory, noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.

Features:

• Extend VGA video and stereo audio signal max up to 300m over one UTP cat5e/6 cable
• Adjusting GAIN and PEAK to adapt for the different length of UTP cable.
  GAIN: Brightness adjustment.
  PEAK: Skew adjustment.
• Support resolution max up to 1920x1200.
• Dual output at local unit: 1 x VGA output for local site, plus 2 x UTP output for remote site.
• Work with monitors, projectors, HDTV, and flat panels.

Product Specification:

• Connector
  Input connector: VGA (Female 15pin), Stereo Audio
  Output connector: VGA (Female 15pin), Stereo Audio,2xRJ45
• Operating Frequency
  Vertical Frequency Range: 60/75/85Hz
  Resolutions (PC): 640X480, 800X600, 1024X768, 1280X720, 1280X768, 1280X960, 1280X1024, 1600X900, 1600X1200, 1920X1080, 1920X1200
• Mechanical
  Size of VGA UTP Extender 1X2 Splitter: 102×100×25mm
  Weight of VGA UTP Extender 1X2 Splitter: 298g
  Size of Receiver (L-W-H): 81.5×43×23MM
  Weight of Receiver (Net): 108g
• Environmental
  Operating Temperature: 0°C to +70°C
  Operating Humidity: 10% to 85 % RH (no condensation)
  Storage Temperature: -10°C to +80°C
  Storage Humidity: 5% to 90 % RH (no condensation)
• Power Requirement
  Power Supply for VGA UTP Extender 1X2 Splitter: 5V@2A, max 5W
  Power Supply for Receiver: 5V@2A, max 5W
• Regulatory Approvals
  Converter Unit: FCC,CE,UL
  Power Supply: UL,CE,FCC

D2611XNA3R - VGA UTP Amplified Receiver with Audio

This VGA UTP Extender with Audio receiver  by Cat5 x1 works with the Sender as a full functional module by receiving the distributed signal from the sender and transmitting to display. Only by the most inexpensive CAT-5e/6 cable the full functional module extend the VGA display max up to 300 meters.

Features:

• Receiving VGA video and stereo audio signal max up to 300m over one UTP cat5e/6 cable
• Adjusting GAIN and PEAK to adapt for the different length of UTP cable.
  GAIN: Brightness adjustment.
  PEAK: Skew adjustment.
• Support resolution max up to 1920x1200.
• Work with monitors, projectors, HDTV, and flat panels.

Product Specification:

• Connector
  Input connector:  RJ45
  Output connector: VGA (Female 15pin), Stereo Audio
• Operating Frequency
  Vertical Frequency Range: 60/75/85Hz
  Resolutions (PC): 640X480, 800X600, 1024X768, 1280X720, 1280X768, 1280X960, 1280X1024, 1600X900, 1600X1200, 1920X1080, 1920X1200
• Mechanical
  Size of Receiver (L-W-H): 81.5×43×23MM
  Weight of Receiver (Net): 108g
• Environmental
  Operating Temperature: 0°C to +70°C
  Operating Humidity: 10% to 85 % RH (no condensation)
  Storage Temperature: -10°C to +80°C
  Storage Humidity: 5% to 90 % RH (no condensation)
• Power Requirement
  Power Supply for Receiver: 5V@2A, max 5W
• Regulatory Approvals
  Converter Unit: FCC,CE,UL
  Power Supply: UL,CE,FCC