• Designed for use as surface-mounted junction box, service box, switch box and cutout box.

• Bodies and doors fabricated from 16 or 14 gauge steel

• 3" depth boxes furnished with formed steel hinge non removable cover. 4" and 6" depth boxes furnished with clamp style hinges allowing for removable/replaceable covers

• Various sizes of removable concentric knockouts are furnished on all four sides of standard cutout boxes

• Mounting holes on back of box

• ANSI-61 gray polyester powder inside and out

• See Accessories J1-J22

A-Series Hinge Cover Enclosures:

Catalogue Number	Body / Door Steel Gauge	Enclosure Size H+1⁄8", W+1⁄8", D+3⁄16"	Knockout Patterns
			Width Side	Height Side
A040503+	16/16	5.00x4.50x3.00
A040604	16/16	6.00x4.00x4.00
A060603+	16/16	6.00x6.00x3.00
A060604	16/16	6.00x6.00x4.00
A060606	16/16	6.00x6.00x6.00
A060804	16/16	8.00x6.00x4.00
A080804	16/16	8.00x8.00x4.00
A080806	16/16	8.00x8.00x6.00
A081004	16/16	10.00x8.00x4.00
A081006	16/16	10.00x8.00x6.00
A101004	16/16	10.00x10.00x4.00
A101006	16/16	10.00x10.00x6.00
A081204	16/16	12.00x8.00x4.00
A101204	16/16	12.00x10.00x4.00
A101206	16/16	12.00x10.00x6.00
A121204	16/16	12.00x12.00x4.00
A121206	16/16	12.00x12.00x6.00
A121504	16/16	15.00x12.00x4.00
A151506	16/16	15.00x15.00x6.00
A121604	16/16	16.00x12.00x4.00
A121606	16/16	16.00x12.00x6.00
A161606	16/16	16.00x16.00x6.00
A121804	16/16	18.00x12.00x4.00
A121806	16/16	18.00x12.00x6.00
A151804	16/16	18.00x15.00x4.00
A181806	16/16	18.00x18.00x6.00
A182406	14/14	24.00x18.00x6.00
A242406	14/14	24.00x24.00x6.00
A243006	14/14	30.00x24.00x6.00
A243606	14/14	36.00x24.00x6.00
A243608+	14/14	36.00x24.00x8.00
NOTE: Must specify CSA Label when ordering. (+) All products, unless otherwise denoted by a (+), are: H+1/8", W+1/8", D+3/16" NOTE: 8" deep enclosures do not have mounting embosses in back of enclosure, only mounting holes. NOTE: Second numerical value of catalog # represents height Knockout Sizes: A 1/2" ~ 3/4" B 3/4" ~ 1" F 1" ~ 1-1/4"